Turning Energy Saver™ Mode On and Off

Our Classic, Elegant and Touch consoles include an environmentally friendly feature called Energy Saver™ mode. When the feature is activated, the console will go to sleep after 15 minutes of inactivity to save power. A small green LED will light on the display alerting you that the machine is in Energy Saver™ mode.

For technical reasons, the Energy Saver mode is set to OFF as a default when the machine leaves the factory. Here’s how to change the Energy Saver setting from OFF to ON.

Treadmill Classic console

  1. Start by plugging in and turning on the treadmill.
  2. Step on the side rails and insert the safety key.
  3. Simultaneously press and hold the INCLINE UP and SPEED DOWN arrow buttons for 3-5 seconds. The console will beep and begin to scroll SELECT ENG MODE. At this point you can release the buttons.
  4. For the Energy Saver mode (ESM), press the INCLINE UP arrow button to take you to ENG3.
  5. Press the ENTER button.
  6. Now press the INCLINE UP button, and the display will change between ON and OFF.
  7. Once it is displaying the desired output, press and hold the STOP button for 3-5 seconds to exit. The console will beep and begin to scroll SELECT ENG MODE. At this point you can release the button.
  8. Finally, press and hold the STOP button again to exit Engineering Mode. The console will beep and return to the main screen. At this point you can release the button.

Treadmill Elegant console

  1. Start by plugging in and turning on the treadmill.
  2. Step on the side rails and insert the safety key.
  3. Simultaneously press and hold the INCLINE UP and SPEED DOWN arrow buttons for 3-5 seconds. The console will beep and enter Engineering Mode. At this point you can release the buttons.
  4. Now press the top left ATM-style button to select Settings.
  5. Once in Settings, press the top right ATM-style button to select Continue.
  6. Using the two middle-left ATM-style buttons select ON or OFF.
  7. Once it is displaying the desired output, press the bottom left ATM-style button to select Finished.
  8. Finally, press the STOP button to return to the main screen.

Treadmill Touch console

  1. Start by plugging in and turning on the treadmill.
  2. Step on the side rails and insert the safety key.
  3. Simultaneously press and hold the INCLINE UP and SPEED DOWN arrow buttons for 3-5 seconds. The console will beep and enter Engineering Mode. At this point you can release the buttons.
  4. Using the touchscreen, press the selection for Settings on the left side of the screen.
  5. Once in Settings, press the word “Energy Saver,” then make your selection for ON or OFF with the buttons that appear in the top right side of the screen.
  6. Once the desired output is selected, press the HOME button on the top-right side of the screen to exit Engineering Mode.

Bike/Elliptical Classic console

  1. Start by plugging in the bike or elliptical.
  2. Simultaneously press and hold the RESISTANCE UP and RESISTANCE DOWN arrow buttons for 3-5 seconds. The console will beep and begin to scroll SELECT ENG MODE. At this point you can release the buttons.
  3. For Energy Saver mode (ESM) press the RESISTANCE UP arrow button to take you to ENG2.
  4. Press the ENTER button.
  5. Now press the RESISTANCE UP button, the display will change between ON and OFF.
  6. Once it is displaying the desired output, press and hold the STOP button for 3-5 seconds to exit. The console will beep and begin to scroll SELECT ENG MODE. At this point you can release the button.
  7. Finally, press and hold the STOP button again to exit Engineering Mode. The console will beep and return to the main screen. At this point you can release the button.

Bike/Elliptical Elegant console

  1. Start by plugging in the bike or elliptical.
  2. Simultaneously press and hold the RESISTANCE UP and RESISTANCE DOWN arrow buttons for 3-5 seconds. The console will beep and enter Engineering Mode. At this point you can release the buttons.
  3. Now press the top left ATM-style button to select Settings
  4. Once in Settings, press the top right ATM-style button to select Continue.
  5. Using the two middle-left ATM-style buttons select ON or OFF.
  6. Once it is displaying the desired output, press the bottom-left ATM-style button to select Finished.
  7. Finally, press the STOP button to return to the main screen.

Bike/Elliptical Touch console

  1. Start by plugging in the bike or elliptical.
  2. Simultaneously press and hold the RESISTANCE UP and RESISTANCE DOWN arrow buttons for 3-5 seconds. The console will beep and enter Engineering Mode. At this point you can release the buttons.
  3. Using the touchscreen, press the selection for Settings on the left side of the screen.
  4. Once in Settings, press the word “Energy Saver,” then make your selection for ON or OFF with the buttons that appear in the top-right side of the screen.
  5. Once the desired output is selected, press the HOME button in the top-right side of the screen to exit Engineering Mode.

Comments are closed.