Treadmills – To lubricate or not to lubricate?

To ensure maximum life of your treadmill, proper maintenance is a must do! Please refer to your owner’s manual for any questions regarding maintenance. Depending on your model, you may sometimes have to lubricate the running deck with paraffin wax. The reason for applying wax to the running deck is so the running belt moves smoothly over the deck surface. The wax reduces the friction between the two, thus creating a longer life span for your running belt and deck.

Please note that if you have had your running belt and deck replaced in 2012 and after, it is possible you have a maintenance-free running belt and deck. If you are unsure, please call tech support at 800-335-4348 and we can assist you in figuring that out. If you have a maintenance-free running deck and belt, do not put any wax, or any type of lubricant on your treadmill. They are made so the running belt is infused with wax, and will run smoothly onto the deck, requiring no maintenance from you!

If your treadmill running deck does require wax, it is a fairly straight forward procedure. We recommend the use of a SLic-STik, which is a wand with wax on the end, and it makes it a fairly easy process.

  1. Start off by turning off and unplugging the treadmill.
  2. Loosen the rear roller bolts with an Allen wrench to allow the belt to be lifted up from the sides of the deck.
  3. Clean and clear the deck of foreign debris. Inspect the deck for signs of wear. If large deep scratches are present or the black coating has worn to wood color, the deck should be flipped to a good side or replaced.
  4. If surface is OK, lift the side of the belt and insert SLic-STik under the belt to wax the surface. Generously apply the SLic-STik to the deck from front to back using a back and forth movement concentrating on the center surface area of the deck.
  5. Remove the SLic-STik from under the belt and adjust the belt back to its proper tension. Plug the treadmill in and it is ready to use.

A Vision Fitness treadmill deck should be lightly waxed every 500 miles to insure maximum life of the treadmill components, but it is better to wax more often than to wait too long. However it is important to note that over-waxing can have a negative effect, such as belt thumping or excess wear of components.

To assure maximum life of the components without over-waxing, the following schedule may be followed:

lubrication frequency

Following these guidelines can help keep your treadmill in great working condition. If you want to purchase a wax stick, you can by calling tech support at 800-335-4348.

Comments are closed.